Refinish Help

Mike Shaw · June 23, 2008, 07:06:00 PM

Hey Guys ..I need a tad bit of help. After refinishing with tru-oil ( 8 coats )sanding between coats and letting dry a week can i wet sand with 2000 paper and polish?....Thanks Mike

TRAP · June 23, 2008, 07:46:00 PM

Sounds about right. Show us pics when you're done.

Trap

Mike Shaw · June 23, 2008, 08:13:00 PM

I got the refinishing part down ok. I was just wanting to know if its ok to wet sand with 2000 and polish in about a week.. Mike

kurtbel5 · June 24, 2008, 11:41:00 AM

After wet sanding what do you plan on polishing with?I'm at the same spot with a couple.
Kurt

Mike Shaw · June 24, 2008, 12:13:00 PM

Hey Kurt: I have been polishing bows with 3M Perfect-It II Rubbing Compound and it seems to do a good job....Mike

kurtbel5 · June 24, 2008, 01:11:00 PM

Mike,
Thanks

d. ward · June 26, 2008, 06:23:00 AM

Hi guy's I will not post it as yet,but as soon as I can get together with Terry I am going to be selling bowdoc's one step bow polish cleaner and protecter on the tradgang sponsors list..no promo's until then...Thanks,bowdoc

MJB · June 26, 2008, 02:38:00 PM

Doc
GREAT NEWS

billy shipp · July 08, 2008, 12:22:00 AM

Ok refinishing gurus....I'm working on another bow. What is the trick to sanding and working around decals and writing on the bow?
I'm smart enuff to sand and wipe on tru-oil, but don't have enuff sense to post pics...I'm working on that and I'll show ya'll what I've been working on one day soon.