Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Main Menu

Form question

Started by Kx199, March 15, 2015, 04:58:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Kx199

Bow hand. Is it best to lock your elbow or have a slight bend? I try both but feel that I have a hard time duplicating my shot cycle with a slightly bent bow hand. I have decent results with it, but it's easy to bend too much, not being consistent.
Thanks guys!

Loving the forum and the 70 degree weather we are having today!

jt85

Not an expert by any means but I personally keep a slight bend in my elbow.
Black Widow PCH 58" 48#@28"
Mohawk Sparrowhawk 62" 49@28
Mohawk Sparrowhawk 62" 52#@28
Wengerd Ibex 58" 50#@28

longbow fanatic 1

I lock my elbow, then rotate my elbow to 9 o'clock (right handed shooter). It's very repeatable.

moebow

My take.

Locked joint = willing to sacrifice the joint to the task at hand.

Bent elbow, bow held with muscle alone = less consistent.

Elbow straight BUT NOT LOCKED = bone on bone and most consistent.  (yes, elbow pronated (rolled in).

Arne
11 H Hill bows
3 David Miller bows
4 James Berry bows
USA Archery, Level 4 NTS Coach

Are you willing to give up what you are; to become what you could be?

McDave

+1 elbow straight but not locked.
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.

njloco

It's bent but not locked, like what Arne and McDave say above, you'll just have to play with it. If you have a fixed vertical bar, like on a metal fence. Grab hold of it, lean on it. You'll notice if your using your muscle's it will get uncomfortable pretty quick. Now while your holding it straighten your arm out but don't lock it, now just slightly rotate your elbow so it's horizontal to the ground. What you should end up with is a slight bend in the elbow, but the pressure is really resting on the bone !

Good luck !

  • Leon Stewart 3pc. 64" R/D 51# @ 27"
  • Gordy Morey 2pc. 68" R/D 55# @ 28"
  • Hoyt Pro Medalist, 70" 42# @ 28" (1963)
  • Bear Tamerlane 66" 30# @ 28" (1966)- for my better half
  • Bear Kodiak 60" 47# @ 28"(1965)

slowbowjoe

Been working with bow arm straight but not locked, like Moebow and McDave are saying also  (I listen to those guys a lot).
I have my anchor fairly consistent, but I'm still trying to establish consistency with my bow arm - straight but not bent is what I'm working with presently for that.

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©