Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Main Menu

Draw length?

Started by Bwhntr247, January 02, 2017, 11:36:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bwhntr247

When I check my draw length on my recurve or longbow I come up with 28 1/2". I've checked using someone to mark the arrow at the back of the riser and the paper square method. This is a half inch longer than my compound draw length, I feel comfortable locked in and not over extended. I'm just wondering if this is semi normal considering almost everything I read says it should be shorter. Thanks.
Elkhart 2pc #50@28"
Thunderchild #49@28"
Blackbear #50@28"

And God was with the lad; and he grew, and dwelt in the wilderness, and became an archer.

McDave

If you are drawing the bow correctly, using your back muscles instead of just hauling back using your arm muscles, it should be okay.  If you are just getting started in traditional archery, your draw length may change.  Even later on, if you change your form, it may change again.  Because of that, I would cut my arrows no shorter than 29 1/2" at this point.

I don't know why it would be longer than your compound draw length.  Maybe something to do with the length of your mechanical release or a different anchor.
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.

KeganM

In my experience folks who were properly set up on their compound and transition without overbowing will usually gain half an inch or so of draw length on single string bows because there's no D-loop or release.

Bwhntr247

Thanks, that was kind of my thinking a lot of people shooting compound are over drawing.
Elkhart 2pc #50@28"
Thunderchild #49@28"
Blackbear #50@28"

And God was with the lad; and he grew, and dwelt in the wilderness, and became an archer.

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©