Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Crooked Stic on July 07, 2024, 05:24:29 PM

Title: Nuther something new
Post by: Crooked Stic on July 07, 2024, 05:24:29 PM
I am calling it. The other something new did not care for the looks of it. Thus a nuther one. With a 15 in. Riser this one will be 59. Width plays a part in this one.being not so quick off the fades to start the width taper and also a ST wedge to give more or less horsepower by draw length. Optimizing to come. The pic is probably a. Bit over 29 so looking still pretty good.
[attachment=1][attachment=2]
Title: Re: Nuther something new
Post by: Crooked Stic on July 07, 2024, 05:25:48 PM
[attachment=1]
Title: Re: Nuther something new
Post by: Kirkll on July 07, 2024, 07:14:36 PM
deleted
Title: Re: Nuther something new
Post by: Crooked Stic on July 07, 2024, 09:14:48 PM
First off it's not a fast taper .002. And they are rock solid. Where you seeing a hinge?
ST straight taper
Title: Re: Nuther something new
Post by: Crooked Stic on July 07, 2024, 09:42:43 PM
[attachment=1]
Title: Re: Nuther something new
Post by: Kirkll on July 08, 2024, 10:26:17 AM
deleted
Title: Re: Nuther something new
Post by: Crooked Stic on July 08, 2024, 10:34:41 AM
If you paid attention to my original post I did say optimizing to be done. This is brand new and I don't expect you nailed the first time on your designs. I do consider your input tho.[attachment=1]
Title: Re: Nuther something new
Post by: Kirkll on July 09, 2024, 10:27:05 PM
deleted
Title: Re: Nuther something new
Post by: Crooked Stic on July 09, 2024, 10:43:09 PM
Finished this one today. To be honest I liked the way it shot so much I could hardly finish it up. Wanted to keep shooting it. I did leave the tips plenty wide an improvement is going to be narrowing them and maybe going to a 0025 taper. But right now I have a another build to do before I play some more  :bigsmyl:[attachment=1]
Text only | Text with Images