What's everyone use for glue on alignment pins? Haven't really had too many come out, but had one recently and thought about trying jb weld.
I use EA40 because I always have it, same on threaded inserts. I do grind or file a little divot on 2 sides of pin to keep it in place.
i've always used CA, but like Kenny said, i hit the lower portion of the pins with an 80 grit sanding disc to rough em up. kirk
If I glue them it would be C A. Most timesno glue. And make sure the Limb holes are not too tight,
You know what I found works great for the pin holes in your limbs? Good old Johnson's past wax. I take a heat gun and warm up the wax until it starts to liquify, then take a Q tip and lube up the holes. I would imagine regular parifin wax would do the trick too, or even string wax.
Kirk
Yes sir Kirk I use pottyring wax. (A new one :laughing: ) and it works well also on the pad area for lube.
Quote from: Crooked Stic on September 06, 2023, 08:39:36 PM
Yes sir Kirk I use pottyring wax. (A new one :laughing: ) and it works well also on the pad area for lube.
I'm sorry stic... I am NOT touching that one... :biglaugh:
I use MT-13 by smooth on.