I built this sinew-backed chokecherry bow in the Plains Indian style several years ago. It is 48" long and pulls 48# at 25" It is made from a branch of a chokecherry tree that is native to the High Plains area of the Texas Panhandle. I cut this branch from a tree on a branch of the Brazos River near Lubbock, Texas. I wanted to see if I could make a Comanche-style bow from it. I recurved it slightly while it was still green, then thinned it down on both the back and the belly, leaving only the handle section round. I then put three layers of sinew on it. (http://i297.photobucket.com/albums/mm219/spiermo/chokecherry%20bow/comancheside.jpg) (http://i297.photobucket.com/albums/mm219/spiermo/chokecherry%20bow/comanchefulldraw.jpg) (http://i297.photobucket.com/albums/mm219/spiermo/chokecherry%20bow/comanchebraced.jpg) (http://i297.photobucket.com/albums/mm219/spiermo/chokecherry%20bow/comanchebowfront.jpg)
AWESOME!
Ray ;)
For such a short bow I would have used more of the limbs, it looks like all the work is being done in the inner thirds. But hey, I'm still learning.
Very Very NICE!!!!!
How wide is it Dano?
:D :bigsmyl:
cool looking bow dan
that is sweet...
I dunno Bert :confused: :bigsmyl:
It is 1 1/4" wide at the widest, about 5/8 at the tips. Dano, I am sure that you are right about using more of the limbs, but these stiff limbed reflexed bows really fling an arrow, so I never tried to tiller it to a more circular shape.
Yep, I know, I like that in a longer bow.
My favorite bow that I have made is similar to this one. A 60" Plain's Indian Hybrid but it's a little more gull winged shaped.
Ray ;)