I am putting together the hotbox and limb form for a Bingham takedowm recurve. I have finished the hot box and have glued the wood together for the limb form.
My calculation was off just a bit for the limb form and my finished width is a 1/6" over the design desired width. I called Bingham and they said a 1/6" wasn't going to be a problem.
As I am getting ready to cut the limb form into two pieces...Is there anyone out there that has used the Bingham system?
Any information that will help me from making any mistakes???
Sorry I can't help much with glass bows, I've played with a few. I noticed we live pretty close to each other. I'm over here in Overton, I'm in the phone book, maybe we can get together some time.
I don't even know what kind of style that is... Good luck with it.
Danial, you live in Overton???
We live really close to each other!
Check it out Sal. http://www.binghamprojects.com/features.htm
Yep, I'm on Cottonwood.
I've made a few...
Just follow the plans,you should be good.
If you wanna save some sanding and have acess to a router,here is how I do it nowdays....
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=054410
I also sell a few lams,here
http://www.kennyscustomarchery.com/
Hey Dano,how are ya? :wavey:
Good Kenny, how are you?
THANKS KENNY!!!
The link was awesome and I wish we lived closer to each other. I will keep you posted as to my progress.
Just fine,we mmet at mojam? Do I have the right feller?
Yep, I bought that kgnarly looking stave from ya. It'll make a bow. :bigsmyl: Thanks again. So what size router bit did you use? It has to be a bit long huh? There aren't that many pattern cutting bits out there that are all that long.
Good deal Ron!!
Dano,I used a 1/4" x 2" strait bit,but my form was only 1 1/2" thick!
Kenny, thats a awesome looking bow you did in the link....
Thanks Sal!!
BTW,your order ships in the AM
Kool, Thanx Kenny