Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Bladepeek on July 04, 2016, 02:47:00 PM

Title: New life for old shop knife
Post by: Bladepeek on July 04, 2016, 02:47:00 PM
Quite a few years ago, I was making a batch of knives to send out for heat treating. One of them had a pretty shabby grind, but the incremental cost of the additional knife was small, so the bad grind when out too. When I got the knives back, this one got wrapped with tape and tossed on the bench. It has been used over the years for cutting wire, cardboard, whatever needed cutting in the shop.

Last week, I took a closer look at it and decided to fix it up. I had a nice fresh belt and it actually cleaned up about as good as any I've done before. I rubbed it out, put some blue-dyed and stabilized buckeye scales on it and I'm no longer so ashamed of it. ATS-34 @ RC-60.

Guess maybe it's time to make a sheath for it and maybe clean the gunk out of the jimpping grooves    :rolleyes:    

  (http://i299.photobucket.com/albums/mm312/bladepeek/Ron%20Peek%20Knives/20160702_125359.jpg) (http://s299.photobucket.com/user/bladepeek/media/Ron%20Peek%20Knives/20160702_125359.jpg.html)

  (http://i299.photobucket.com/albums/mm312/bladepeek/Ron%20Peek%20Knives/20160702_124605_018.jpg) (http://s299.photobucket.com/user/bladepeek/media/Ron%20Peek%20Knives/20160702_124605_018.jpg.html)
Title: Re: New life for old shop knife
Post by: gudspelr on July 04, 2016, 05:26:00 PM
That looks great. The contouring on the handle looks nice and comfy, too. Bet it sees a lot of use in the years to come  :) .


Jeremy
Title: Re: New life for old shop knife
Post by: Greyswampfox on July 05, 2016, 06:52:00 AM
I like it.  I agree with gudspeir the shape looks to make it a nice user.  Thanks for sharing.
Title: Re: New life for old shop knife
Post by: KSCATTRAPR on July 07, 2016, 11:52:00 PM
Great little knife, I agree with everyone else on this one, looks like it would be very functional.
Title: Re: New life for old shop knife
Post by: FerretWYO on July 08, 2016, 10:04:00 AM
very cool
Title: Re: New life for old shop knife
Post by: Steve Nuckels on August 10, 2016, 08:36:00 PM
Ron, very nice knife cool story!

Steve
---------
apotomac forge
Member, W.F. Moran Jr. Foundation
ABS Apprentice Smith
Title: Re: New life for old shop knife
Post by: TrackerNy on August 11, 2016, 11:04:00 AM
Really nice little knife. I like that buckeye handle!
Title: Re: New life for old shop knife
Post by: Lin Rhea on August 11, 2016, 01:19:00 PM
That's a fine design for skinning and EDC. Great job.
Title: Re: New life for old shop knife
Post by: Bladepeek on August 11, 2016, 10:40:00 PM
Thanks Lin. Wore it to a trad bow shoot and a guy wanted it more than I did. Now I'm back to no knife of my own again.

Guess it's time to get my butt back to work in the shop before hunting season catches me with someone else's knife on my belt.
Title: Re: New life for old shop knife
Post by: Sam McMichael on August 13, 2016, 10:20:00 AM
For a junker knife, it sure turned out nice. Kind of like when the beautiful princess kissed the frog.